About 35 min one-to-one, or 40 min with a small group
1. Warm up (5 to 10 min): Ask the quick questions with notes closed.
2. Teach: Work through the lesson slides in order.
3. Coach practice: Use the student examples and try-it tasks.
4. Check: Finish with the outcome prompts below.
Warm-up questions
If tutors know a gas's pressure, volume and temperature, what else can tutors figure out?Listen for: The number of moles. This sets up P V = n R T.
What value of R do tutors use when pressure is in kPa and volume in litres?Listen for: The value is 8.314. This checks recall and unit matching.
Does one mole of gas always take up 22.4 L?Listen for: Only at STP. At SATP it is about 24.8 L. Listen for conditions mattering.
What to check they understood
20-B1.4k
Ask them to find the moles of gas in a 5.00 L tank at 200 kPa and 25.0 °C.
A strong answer converts to 298 K, rearranges P V = n R T to n = P V divided by R T, and gets about 0.404 mol with units checked.
20-B1.4k
Ask them to explain why 22.4 L per mole fits STP while SATP needs a different molar volume.
A strong answer says STP is 0 °C and 101.325 kPa while SATP is 25 °C and 100 kPa, and the warmer temperature makes each mole spread out to about 24.8 L.
Likely gaps from earlier grades
Using Celsius in P V = n R T is the most common error. Ask them to convert before writing any number into the equation.
Class slides
Work through the class slides
1 / 6
Four measurements, one equation
A sealed sample has a pressure, a volume, a temperature, and an amount of gas, and any three determine the fourth.
The link among those four is the ideal gas law, once the temperature is in kelvin and the units match R.