Stoichiometry in industry and the lab

Using the mole ratio leaves less unused reactant and raises the percent of product collected. A scrubber that catches a gas still leaves a residue to handle.

Open matching student lesson ↗︎
20-D2.1sts20-D2.2sts20-D2.1s20-D2.2s20-D2.3s20-D2.4sAttitudes: collaboration

Session outline

About 35 min one-to-one, or 45 min with a small group

  1. 1. Warm up (5 to 10 min): Ask the quick questions with notes closed.
  2. 2. Teach: Work through the lesson slides in order.
  3. 3. Coach practice: Use the student examples and try-it tasks.
  4. 4. Check: Finish with the outcome prompts below.

Warm-up questions

  • Why would a factory care about using the exact mole ratio of reactants?Listen for: Extra reactant is wasted money and may need disposal. Listen for cost and waste.
  • Does a car's catalytic converter remove carbon dioxide?Listen for: It reduces carbon monoxide and other gases but still releases carbon dioxide. This checks a common belief.
  • Their group's result differs from the others. What should tutors do?Listen for: Keep it, check for errors and discuss. Watch for the urge to delete it.

What to check they understood

  • 20-D2.1sts

    Ask them to explain how stoichiometry helps an industrial plant reduce waste and cost.

    A strong answer says calculating the mole ratio lets the plant add just enough of each reactant, so less excess is bought and disposed of and more product is collected.

  • 20-D2.2s

    Ask them to calculate percent error for a titration result of 0.105 mol/L when the accepted value is 0.100 mol/L.

    A strong answer subtracts to get 0.005, divides by 0.100 and multiplies by 100 to get 5%, and suggests a source such as reading the burette at the wrong level.

Likely gaps from earlier grades

  • Students may think scrubbers and converters remove every emission. Each device targets certain gases and leaves others.

Work through the class slides

1 / 6

Leftover feed is a cost

  • A plant that pours a large excess of one reactant pays for material that ends up as leftover reactant.
  • A higher percent of the calculated product collected means less of that feed was lost to an unfinished change or a side path.