About 30 min one-to-one, or 35 min with a small group
1. Warm up (5 to 10 min): Ask the quick questions with notes closed.
2. Teach: Work through the lesson slides in order.
3. Coach practice: Use the student examples and try-it tasks.
4. Check: Finish with the outcome prompts below.
Warm-up questions
How many inches are in one foot?Listen for: Twelve. This checks imperial recall.
On a tape measure, what does the mark halfway between 3 and 4 inches mean?Listen for: Three and one half inches. This checks reading fractions.
Is a gallon the same size everywhere?Listen for: An American gallon is about 3.8 litres and a British one about 4.5 litres. Listen for awareness of the difference.
What to check they understood
M2
Ask them to convert 8 feet 3 inches to inches and explain each step.
A strong answer multiplies 8 by 12 to get 96 inches, adds 3, and gets 99 inches.
M2
Ask them to read a tape measure to the nearest sixteenth of an inch and write the measurement in simplest form.
A strong answer counts the sixteenth marks correctly, writes a fraction such as five eighths of an inch, and simplifies it.
Likely gaps from earlier grades
Students write 8.3 feet for 8 feet 3 inches. Remind them a foot has 12 inches, so the decimal misleads.
Class slides
Work through the class slides
1 / 7
A tape that still speaks inches
A framer's tape, a plumbing fitting, and some aviation sheets in Canada still list feet and inches beside SI.
These units come from older English trade measures.
A tape splits each inch in half, then in half again: 1/2, 1/4, 1/8, and 1/16.