Units / Unit M: Measurement in SI and imperial
Linear measurement on the job
A pipe wall is half the gap between the outside and inside diameters, and a 6.5 metre by 2.0 metre mat has a perimeter of 17 metres.
Session outline
About 35 min one-to-one, or 40 min with a small group
- 1. Warm up (5 to 10 min): Ask the quick questions with notes closed.
- 2. Teach: Work through the lesson slides in order.
- 3. Coach practice: Use the student examples and try-it tasks.
- 4. Check: Finish with the outcome prompts below.
Warm-up questions
- What is the perimeter of a room?Listen for: The distance around its edges. This checks the basic idea.
- How could tutors find the thickness of a pipe wall without cutting it?Listen for: Compare the outside and inside diameters. Listen for reasoning.
- Why would a carpenter measure twice?Listen for: Mistakes waste material and money. This links measurement to work.
What to check they understood
- M3
Ask them to find the perimeter of a 6.5 metre by 2.0 metre mat.
A strong answer adds two lengths and two widths to get 17 metres.
- A1
Ask them to find the wall thickness of a pipe with an outside diameter of 5.0 cm and an inside diameter of 4.2 cm.
A strong answer subtracts to get 0.8 cm, then halves it because the gap includes both walls, giving 0.4 cm.
Likely gaps from earlier grades
- Students forget to halve the diameter gap. Sketch the cross section.
Class slides
Work through the class slides
1 / 7